Pre-registration to the ILC: CE-X-LS Determination of the case hardening depth

CE-X-LS

0,00€ excl. tax - 0,00€ inc. tax

Reference of the ILC

CE-X-LS

References of test methods

ISO 18203  EN 10328

References of test methods for which the ILC can indirectly provide an assessment of performance

ISO 2639  ISO 3754  ISO 4970  ASTM B934  SAE J423

 

 

 

These may be superseded standards, which some of the reference standards may have replaced, or EN or ASTM or ISO standards that are close but not exactly equivalent to the reference standards.

       

Frequency

For this ILC, there is a risk that the number of registrations is low. To ensure an enough number participants, a pre-registration procedure is put in place, as follows:

 

1 - Participants interested in participating pre-register using the registration form. No invoicing is made for this pre-registration;

2 - When at least 10 potential participants have pre-registered, CompaLab asks each of these pre-registrees to confirm their willingness to participate and what are the characteristics for which they commit to provide results;

3 - If at least 8 participants confirm their intention to participate, the CIL organisation concerned is engaged.

Main characteristics

CHD (Case hardening depth), SHD (Surface hardening depth), THD (Total thickness of surface hardening depth), CLT (Compound layer thickness) against ISO 18203, DS against EN 10328

   
       

Determination of the assigned values (“true values” for each characteristic)

By statistical computation of the totality of the results with possible selection on competence criteria (accreditation, validation by a reference body, quantity of tests performed in the year), test to detect possible collusion, merging of results not obtained in reproductibility conditions, suppression of technically unvalid results.

Type of statistical computation

For numerical results, the statistical computation will provide an assigned value with its attached uncertainty, values of standard deviations for repeatability and reproductibility, limits of alerts for bias and repeatability of the participant, indiviual values for uncertainty of results of participants.

Number of products submitted to tests

1

Number of samples per participation

6

Max number of operators per participation

10 (For this CIL, the type of test and sample size allow to provide results determined by several different operators and by several different methods)

Product submitted to tests

Low alloyed steel

Type of samples

Discs

Approximate dimensions of samples

Ø20x10 mm

Specific preparation to be performed by the participant

Preparation of surfaces of observation

                   

Special notice for this ILC

ISO 18203 replaces ISO 2639, ISO 3754 and ISO 4970