BE-X-NS: Bending test of a metallic bar
BE-X-NS
0,00€ excl. tax - 0,00€ inc. tax
Presentation for participants
|
BE-X-NS |
||||
|
References of test methods |
ISO 7438 ASTM E290 |
|||
|
Frequency |
For this ILC, there is a risk that the number of registrations is low. To ensure an enough number participants, a pre-registration procedure is put in place, as follows: |
|||
|
|
1 - Participants interested in participating pre-register using the registration form. No invoicing is made for this pre-registration; |
|||
|
2 - When at least 10 potential participants have pre-registered, CompaLab asks each of these pre-registrees to confirm their willingness to participate and what are the characteristics for which they commit to provide results; |
||||
|
3 - If at least 8 participants confirm their intention to participate, the CIL organisation concerned is engaged. |
||||
|
Main characteristics |
Pass/Fail (12 samples submitted to bending at 90° and at 180° with 6 different mandrels of increasing severity: 1d - 1,6d - 2,5d - 4d - 6,3d - 10d, 2 samples per mandrel) |
|||
|
Format of the test results: |
For results expressed as Yes/No type, samples are submitted to tests by sets of 2 items, with increasing severity, so that cut-off conditions for failure can be determined. The assessment of the results of participants is achieved by reference to this cut-off. |
|||
|
|
|
|||
|
Determination of the assigned values (“true values” for each characteristic) |
By statistical computation of the totality of the results with possible selection on competence criteria (accreditation, validation by a reference body, quantity of tests performed in the year), test to detect possible collusion, merging of results not obtained in reproductibility conditions, suppression of technically unvalid results. |
|||
|
Type of statistical computation |
For results expressed as Yes/No type, samples are submitted to tests by sets of 2 items, with increasing severity, so that cut-off conditions for failure can be determined. The assessment of the results of participants is achieved by reference to this cut-off. |
|||
|
Number of products submitted to tests |
1 |
|||
|
Number of samples per participation |
12 |
|||
|
Max number of operators per participation |
1 (it is necessary to order as many participations as there are participating test operators) |
|||
|
Product submitted to tests |
Non alloyed steel |
|||
|
Type of samples |
Bars |
|||
|
Approximate dimensions of samples |
Ø20x200 mm |
|||
|
Specific preparation to be performed by the participant |
None (other than possible necessity to polish the test specimens or to adapt their dimensions to the equipment of the participant) |
|||
|
Price (€) |
375 |
|||
|
Price if online payment (€) |
300 |
|||
|
Approximate weight (kg) |
5 |
|||