Strain controlled axial fatigue test on steel

Prensentation for participants

 

 

Reference of the ILC: FA-X-MP2
   
References of test methods: ISO 12106
References of test methods for which the ILC can indirectly provide an assessment of performance ASTM E606
  These may be superseded standards, which some of the reference standards may have replaced, or EN or ASTM or ISO standards that are close but not exactly equivalent to the reference standards.
   
Frequency: For this ILC, there is a risk that the number of registrations is insufficient. So a pre-registration procedure is put in place, as follows:
  1 - Participants interested in participating pre-register using the registration form. No invoicing is made for this pre-registration;
2 - When at least 10 potential participants have pre-registered, CompaLab asks each of these pre-registrees to confirm their willingness to participate and what are the characteristics for which they commit to provide results;
3 - If at least 8 participants confirm their intention to participate, the CIL organisation concerned is engaged.
                       
Main characteristics: N (Number of cycles before failure for a given emax and for R=-1)
Other characteristics: Tensile and compressive stresses as a function of the number of cycles
  Caution: The number of determinations may be low for the secundary characteristics, what may make inefficient the comparison between laboratories
   
Determination of the assigned values (“true values” for each characteristic): By statistical computation of the totality of the results with possible selection on competence criteria (accreditation, validation by a reference body, quantity of tests performed in the year), test to detect possible collusion, merging of results not obtained in reproductibility conditions, suppression of technically unvalid results.
   
Type of statistical computation: For numerical results, the statistical computation will provide an assigned value with its attached uncertainty, values of standard deviations for repeatability and reproductibility, limits of alerts for bias and repeatability of the participant, indiviual values for uncertainty of results of participants.
Number of products submitted to tests: 1
Number of samples per participation: 6
Max number of operators per participation: 1 (it is necessary to order as many participations as there are participating test operators)
Product submitted to tests: Non alloyed steel
Type of samples: Bars
Approximate dimensions of samples: 2x Ø18x200 mm
Specific preparation to be performed by the participant:  Machining of test specimens (2 test pieces per supplied sample)
                   
Special notice for this ILC: All dimensions of test specimens compatible with size of samples may be used
   
Price (€) 400
Price if online payment (€) 320
Approximate weight (kg) 4